Nitracheck 404 and Nitrate Test Strips Bundle
Nitracheck:
This instrument tests the level of Nitrogen in your grass before cutting. If you are looking to check the Checking the Nitrate levels in grass. The Nitrachek 404 offers a fast, portable and affordable means of establishing nitrate levels in soil, plant, and water. Results in just 60 seconds. This is the most accurate method of checking for nitrates in your grass. Its essential all Nitrogen is not present in order for silage to preserve effectively and achieve higher quality feed.
Nitrate Test Strips:
Rapid and reliable determination of nitrate levels before cutting for silage with our Nitrate Test Strips pack.
Test nitrate levels before cutting for silage. The easy dip-and-read-procedure of the test strips provides a reliable result within one minute. By ensuring low nitrate levels will improve silage quality and fermentation for the farmer. These strips can be used with the Nitra-Chek Meter 404 for extremmly accuarate readings.
Key Features:
- 100 strips per pack
- Results within seconds: Just dip, wait and read against multi-stage colour scale
- Always ready to use: No accessories necessary for evaluation
- Safe results: Desiccant in the stopper for optimal protection of the strips against humidity
- These strips can be used with the Nita-Chek Meter 404
Area’s of application: Agriculture / Horticulture / Environmental.
Your purchase includes one of each:
- Nitrachek 404 Test Meter
- PP3 9v Battery
- 5ml 100ppm Standard solution
- Calibration checker strip
- Cleaning brush & buds
- Protective carry wallet
- Operation instruction manual
- Packed in a carton with custom foam inserts
- Pack of 100 test strips.
How To Use Nitracheck 404
Step 1 Prepare sample solution to be tested.
Step 2 Insert unused test strip into Nitrachek read-head to calibrate/zero strip, then close hatch.
Step 3 When meter reads GO open and remove strips then carefully dip into your sample solution for 2-3 seconds, upon countdown of meter remove and vigorously shake off excess solution, wait for 60 seconds (countdown timer on Nitrachek) for colour change.
Step 4 As countdown approaches 60 seconds (audible bleeps) 3, 2, 1, Insert activated test strip into Read-head (facing LEDs) and close hatch. Measurement is automatic and results are displayed immediately on the large LCD in ppm. Mg/l.
Step 5 You will get the reading back in PPM. This reading will give you an indication if the grass is ready for cutting or if you have to wait another few weeks.